




12 products
VELOUR LASH ADHESIVE
Regular price $55.00 Save $-55.00This Velour lash adhesive is our NEW Rockstar!  Drying time is just right and it just grabs to the natural lashes and fans don’t close. The perfect glue to use in various humidities. It is incredibly flexible and adjusts fabulously to most temperatures and humidities. On top of all these benefits, this lash glue is oil and water-resistant.
Everyone loves a perfect fan. With our volume adhesive, its never been easier to achieve those beautiful fans with no closing.
The viscosity in this adhesive makes it so that there’s no wicking up the fan. Wicking closes fans. We like open fans.
This adhesive works best in humidity between 25%-75% and temperature 60-78 F.
Recommended for intermediate artists
Incorrect work with fast-drying adhesive can cause poor retention.
High temperature OR/AND high humidity causes adhesive to polymerize even faster, which can cause even more retention issues.Â
The best temperature for this glue 20-22°C
The best humidity 40-70%
The way you dip your lash fans in the adhesive will have a very important impact on your clients’ retention. Here is a diagram below, describing the best way to dip your lashes in our adhesive. Ideally, you should never glaze the lashes on top of the glue, as this will not add enough glue.
You should also not dip the lash on the bottom of the glue drop, as your lash will be dipping in glue. The ideal way is to dip about 1-3 mm of the lash tip into the middle of your adhesive drop. This will ensure you have just the right amount of glue in order to ensure great retention.
For best results and to avoid nozzle getting blocked:
– store your Velour lash adhesive horizontally in Airtight container, wooden drawer or in a cool, dry place
– when shaking the glue remove the lid and cover the nozzle with tin foil or wax strip
– wipe the nozzle after every use of the glue
– You can shake to 1 min by hand or 30 seconds with glue shakerÂ
EYELASH EXTENSION GLUE: ULTRA CRYSTAL CLEAR BOND
Regular price $55.00 Save $-55.00Our ThousandLashes' Ultra Crystal Clear Bond  is a showstopper for clients and lash artists alike. With this adhesive, the lashes will never fall off before they are ready to shed! This stuff is magic in a bottle and is the perfect "Go-To" adhesive and must-have for your lash arsenal. This adhesive is incredible in low humidity environments, be sure to always have it on hand in those occasions. It is recommended to use this adhesive for working with colored lashes since it will not leave any color and the lash line will look perfect. This is a great adhesive for clients who are sensitive to regular black adhesives. This clear adhesive does not have the carbon black present in most black adhesives.
Product Description
STORAGE
Keep Lash Glue in an airtight container with dry rice (or silica pack). room temperature. do not store in the fridge. All adhesives should be shaken for 3 minutes prior to use. this adhesive is extremely thin and strong. isolate natural lash before picking up or dipping extension. once isolated, dip 2-3mm (classic lashing) or 1-2mm (volume lashing) and bring right to the natural lash. do not shimmy or "paint" the natural lash with the adhesive. simply press this adhesive to the natural lash base and hold for one second.
All lash adhesives need to be handled with extreme caution and the utmost care. When opening any bottle of adhesive whether new or used you must open the adhesive away from the lash station not by the client's head or where the lash service is taking place.
Excessive amounts of glue on the skin may cause burns or superficial damage to the skin or hair. Thousandlashes is not responsible for any accidents or misuse of adhesive.
Â
Â
Super Bonder
Regular price $39.00 Save $-39.00Another great product to try in order to improve lash retention is the super bonder.
The super bonder is special because it can be directly applied to the lash extension bond that has been formed with the adhesive and the natural lash.
It allows for a tighter bond also blocks glue fumes and adds elasticity to the adhesive bonding points. It’s an awesome product that removes the need for using a nebulizer or nano mister. Since the use of such devices can have the adverse effect of actual shock curing the adhesive making it less stable and more prone to breaking. On the contrary, the super bonder allows the bond to be more elastic more porous, and less prone to breakage.
HOW TO USE IT
LASH ADHESIVE-THOUSANDLASHES’ ULTRA CRYSTAL BOND
Regular price $55.00 Save $-55.00Ultra Crystal Bond
This phenomenal lash adhesive is a favorite for many lash artists. Drying time is 0.5- 1 second. The perfect glue to use in various humidities. Best used for a warm environment. Ideal for easy application.
This glue bond lashes for up to 8 weeks! Very thin consistency and rapid dry makes Volume Lashing so much easier. This lash adhesive has the best retention on the market and significantly helps to reduce time and amount of work with your touch-ups.
Everyone loves a perfect fan. With our volume adhesive, it will never be easier to achieve those beautiful fans with no closing.
The viscosity in this adhesive makes it so that there’s no wicking up the fan. Wicking closes fans. We like open fans.
This glue has tested and amazing performance and the best retention on the market and significantly helps to reduce time in between refills for your clients. Clients tend to love this adhesive since it does not have a strong odor and doesn’t leave any residue or film on the lashes.
This adhesive works best in humidity between 25%-45%(Recommended 40%) and temperature 65-74 degrees. For humid climates or in the summer may require a professional dehumidifier. Recommended for dryer climates.
Â
Warning
All lash adhesives need to be handled with extreme caution and the upmost care. When opening any bottle of adhesive whether new or used you must open the adhesive away from the lash station not by the client’s head or where the lash service is taking place.
Excessive amounts of glue on the skin may cause burns or superficial damage to the skin or hair. Thousandlashes is not responsible for any accidents or misuse of adhesive.
THOUSANDLASHES’ LASH ADHESIVE POWER DUO
Regular price $69.00 Save $-69.00Power Adhesive Duo consists of our 2 best-seller Velour and Ultra Crystal Bond.
First of all, this lash adhesive is our NEW Rockstar! Drying time is just right, as a result, it just grabs to the natural lashes and fans don’t close.
Product Description
Recommended for intermediate artists
This glue bond lashes for up to 8 weeks! It has a very thin consistency and rapid dry as a result it makes volume lashing so much easier.
This glue has the best retention on the market, therefore, it has significantly helped to reduce the time and amount of work with your touch-ups.
Above all, clients tend to love this adhesive since it does not have a strong odor. It doesn’t leave any residue or film on the lashes.
Product Description
For humid climates or in the summer may require a professional dehumidifier.
Warning
LASH ADHESIVE CURE AID: SPEED CURING SOLUTION
Regular price $29.00 Save $-29.00Lash Adhesive Cure Aid: Speed Curling Solution.
When your adhesive starts acting like a DIVA and refuses to cooperate with your room temperature and humidity levels we recommend putting your adhesive back in its place.
The glue cure aid is just the solution you need to speed up the dry time of lash adhesives that isn’t curing effectively due to low humidity levels. If you notice your adhesive taking a long time to cure, and you would like to speed it up the glue aid should be the tool on hand in your arsenal.
Thousandlashes Glue Aid will give you the extra speed you need to work quickly and efficiently. You do not need this glue aid when working in high humidity environments, because your adhesives will naturally speed up due to the humidity levels being high. This can truly be your secret weapon in battling issues with Temperature and Humidity in your lash room.
The Thousandlashes glue aid will also come to the rescue when your lash fans seem to be closing instead of remaining open. Just dab a little drop of the glue aid on the micro brushes and spread it on the lash strips before lash fanning, and watch the magic happen. Your lash fans will remain open, and no longer close as they did before the glue aid came into the picture.
Apply 2-3 drops of the solution of glue aid on your microfiber brush. Wipe at bases of the extension lash strip only as you place it on your tile. Wait 2 mins after application, start applying for your lash extensions as usual.
Use this product minimally, you don’t need a large amount of this solution. The solution must only be applied on the base of the lash strips, not the eyelashes and skin of the clients.
LASH ADHESIVE CURE BUNDLE: PERFECT PAIR
Regular price $74.00 Save $-74.00Lash Adhesive Cure Bundle a perfect pair to add on your lash supplies. A lash adhesive curing aid and the crowd favorite adhesive that works in any humidities.
The velour adhesive works incredibly well in high humidity environments. When working in low humidity environments be sure to have the glue aid on hand in order to speed it up as needed.
When your adhesive starts acting like a DIVA and refuses to cooperate with your room temperature and humidity levels we recommend putting your adhesive back in its place.
The glue cure aid is just the solution you need to speed up the dry time of lash adhesives that aren’t curing effectively due to low humidity levels. If you notice your adhesive taking a long time to cure, and you would like to speed it up the glue aid should be the tool on hand in your arsenal.
Thousandlashes Glue Aid will give you the extra speed you need to work quickly and efficiently. You do not need this glue aid when working in high humidity environments, because your adhesives will naturally speed up due to the humidity levels being high. This can truly be your secret weapon in battling issues with Temperature and Humidity in your lash room.
The Thousandlashes glue aid will also come to the rescue when your lash fans seem to be closing instead of remaining open. Just dab a little drop of the glue aid on the micro brushes and spread it on the lash strips before lash fanning, and watch the magic happen. Your lash fans will remain open, and no longer close as they did before the glue aid came into the picture.
Apply 2-3 drops of the solution of glue aid on your microfiber brush. Wipe at bases of the extension lash strip only as you place it on your tile. Wait 2 mins after application, start applying for your lash extensions as usual.
Use this product minimally, you don’t need a large amount of this solution. The solution must only be applied on the base of the lash strips, not the eyelashes and skin of the clients.
This Velour lash adhesive is our NEW Rockstar!  Drying time is just right and it just grabs to the natural lashes and fans don’t close. The perfect glue to use in various humidities. It is incredibly flexible and adjusts fabulously to most temperatures and humidities. On top of all these benefits, this lash glue is oil and water-resistant.
Everyone loves a perfect fan. With our volume adhesive, its never been easier to achieve those beautiful fans with no closing.
The viscosity in this adhesive makes it so that there’s no wicking up the fan. Wicking closes fans. We like open fans.
This adhesive works best in humidity between 25%-75% and temperature 60-78 F.
Recommended for intermediate artists
LASH ADHESIVE FOR PROFESSIONAL EYELASH EXTENSION
Regular price $120.00 Save $-120.00ThousandLashes’ best-selling glues in a kit. This kit consists of Velour, Ultra Crystal Bond and Ultra Crystal Clear Bond.
The Velour
First of all, this lash adhesive is our NEW Rockstar! Drying time is just right, as a result, it just grabs to the natural lashes and fans don’t close.
Product Description
Recommended for intermediate artists
Ultra Crystal Clear Bond
It is a very flexible adhesive with a wide humidity and temperature range.
Ultra Crystal Bond
This glue bond lashes for up to 8 weeks! It has a very thin consistency and rapid dry as a result it makes volume lashing so much easier.
This glue has the best retention on the market, therefore, it has significantly helped to reduce the time and amount of work with your touch-ups.
Above all, clients tend to love this adhesive since it does not have a strong odor. It doesn’t leave any residue or film on the lashes.
Product Description
For humid climates or in the summer may require a professional dehumidifier.
Optite Adhesive Low humidity Adhesive
Regular price $39.00 Save $-39.00This low humidity adhesive has an  extra light formula for sensitive clients, it  reduces the potential effects on allergic clients. It’s specifically formulated to minimize the potential of irritation, allergy, fume, or odor.Â
This adhesive has been specifically formulated to work in low humidity environments, it is an absolute PRO in low humidities.Â
The low humidity adhesive is perfect for the lash artist that are already really quick at lashing since this glue will dry really quickly in 0.5 seconds.Â
Incorrect work with fast-drying adhesive can cause poor retention.
High temperature OR/AND high humidity causes adhesive to polymerize even faster, which can cause even more retention issues.Â
The best temperature for this glue 20-26°C
The best humidity 20-35%
0.5 seconds dry time
Recommended for minimum 1-1.5 years experience as a lash artist
How much glue is needed?
The way you dip your lash fans in the adhesive will have a very important impact on your clients’ retention. Here is a diagram below, describing the best way to dip your lashes in our adhesive. Ideally, you should never glaze the lashes on top of the glue, as this will not add enough glue.
You should also not dip the lash on the bottom of the glue drop, as your lash will be dipping in glue. The ideal way is to dip about 1-3 mm of the lash tip into the middle of your adhesive drop. This will ensure you have just the right amount of glue in order to ensure great retention.
For best results and to avoid nozzle getting blocked:
Elite High humidity Adhesive
Regular price $39.00 Save $-39.00This high humidity adhesive for eyelash extension has an amazing retention period (bonding) – 6-7 weeks. Your clients will feel like they are really getting the best lashes when their retention is lasting 6-8 weeks.
The high humidity adhesive is perfect for a lash artist that are already really quick at lashing since this glue will actually dry really quickly in 2 seconds
High temperature OR/AND high humidity causes adhesive to polymerize even faster, which can cause even more retention issues.Â
This adhesive is ideal for beginner lash artists with less than one year of experience since it is a slower drying adhesive with 1-2 seconds drying time.
Everyone loves a perfect fan. With our High humidity adhesive, it will never be easier to achieve those beautiful fans with no closing.
The viscosity in this adhesive makes it so that there’s no wicking up the fan. Wicking closes fans. We like open fans.
How much glue is needed?
The way you dip your lash fans in the adhesive will have a very important impact on your clients’ retention. Here is a diagram below, describing the best way to dip your lashes in our adhesive. Ideally, you should never glaze the lashes on top of the glue, as this will not add enough glue.
You should also not dip the lash on the bottom of the glue drop, as your lash will be dipping in glue. The ideal way is to dip about 1-3 mm of the lash tip into the middle of your adhesive drop. This will ensure you have just the right amount of glue in order to ensure great retention.
For best results and to avoid nozzle getting blocked:
Humidity Adhesive Duo
Regular price $68.00 Save $-68.00Don't know which one to get? Why choose if you can get both of them.Â
The low humidity adhesive is perfect for the lash artist that are already really quick at lashing since this glue will actually dry really quickly in 0.5 seconds.Â
This low humidity adhesive has an extra light formula for sensitive clients, it reduces the potential effects on allergic clients. It’s specifically formulated to minimize the potential of irritation, allergy, fume, or odor.Â
This adhesive has been specifically formulated to work in low humidity environments, it is an absolute PRO in low humidities.Â
The low humidity adhesive is perfect for the lash artist that are already really quick at lashing since this glue will dry really quickly in 0.5 seconds.Â
Incorrect work with fast-drying adhesive can cause poor retention.
High temperature OR/AND high humidity causes adhesive to polymerize even faster, which can cause even more retention issues.Â
The best temperature for this glue 20-26°C
The best humidity 20-35%
0.5 seconds dry time
Recommended for minimum 1-1.5 years experience as a lash artist
The high humidity adhesive eyelash adhesive has a quick drying time of 1-2 seconds.
This high humidity adhesive for eyelash extension has an amazing retention period (bonding) – 6-7 weeks. Your clients will feel like they are really getting the best lashes when their retention is lasting 6-8 weeks.
The high humidity adhesive is perfect for a lash artist that are already really quick at lashing since this glue will actually dry really quickly in 2 seconds
High temperature OR/AND high humidity causes adhesive to polymerize even faster, which can cause even more retention issues.Â
This adhesive is ideal for beginner lash artists with less than one year of experience since it is a slower drying adhesive with 1-2 seconds drying time.
Everyone loves a perfect fan. With our High humidity adhesive, it will never be easier to achieve those beautiful fans with no closing.
The viscosity in this adhesive makes it so that there’s no wicking up the fan. Wicking closes fans. We like open fans.
Incorrect work with fast-drying adhesive can cause poor retention.
High temperature OR/AND high humidity causes adhesive to polymerize even faster, which can cause even more retention issues.Â
The best temperature for this glue 20-22°C
The best humidity 40-70%
How much glue is needed?
The way you dip your lash fans in the adhesive will have a very important impact on your clients’ retention. Here is a diagram below, describing the best way to dip your lashes in our adhesive. Ideally, you should never glaze the lashes on top of the glue, as this will not add enough glue.
You should also not dip the lash on the bottom of the glue drop, as your lash will be dipping in glue. The ideal way is to dip about 1-3 mm of the lash tip into the middle of your adhesive drop. This will ensure you have just the right amount of glue in order to ensure great retention.
For best results and to avoid nozzle getting blocked:
Entice customers to sign up for your mailing list with discounts or exclusive offers. Include an image for extra impact.